Accueil | Nos membres | Nous joindre | English | |  

Martin Grenon

 

Membre régulier

Département de génie des mines, de la métallurgie et des matériaux, Université Laval

Pavillon Adrien-Pouliot
1065 avenue de la Médecine
Université Laval
Québec
Québec, Canada
G1V 0A6

418.656.7478
martin.grenon@gmn.ulaval.ca

 

 


 

Thèmes de recherche

  • Génie minier
  • Mécanique des roches
 
 

Thèses et mémoires récents

Landry, Alex , 2015 (Maîtrise). Utilisation d'une approche photogrammétrie-DFN pour l'évaluation des conditions structurales du projet minier souterrain Éléonore.

 
 

Communications scientifiques

Caudal, P., Grenon, M., Turmel, D., Locat, J., 2017. Analysis of a large rock slope failure on the east wall of the LAB Chrysotile Mine in Canada: LiDAR monitoring and displacement analyses. Rock Mechanics and Rock Engineering, 50(4): 807-824. DOI: 10.1007/s00603-016-1145-3.

Grenon, M., Caudal, P., Amoushahi, S., Turmel, D., Locat, J., 2017. Analysis of a large rock slope failure on the east wall of the LAB Chrysotile Mine in Canada: back analysis, impact of water infilling and mining activity. Rock Mechanics and Rock Engineering, 50(2): 403-418. DOI: 10.1007/s00603-016-1116-8.

Grenon, M., Landry, A., Hadjigeorgiou, J., Lajoie, P.L., 2017. Discrete fracture network based drift stability at the Éléonore mine. Mining Technology - Transactions of the Institutions of Mining and Metallurgy: Section A, 126(1): 22-33. DOI: 10.1080/14749009.2016.1199296.

Hadjigeorgiou, J., Grenon, M., 2017. Drift reinforcement design based on Discrete Fracture Network (DFN) modeling. : 123-147.

Esmaieli, K., Hadjigeorgiou, J., Grenon, M., 2015. Capturing the complete stress-strain behaviour of jointed rock using a numerical approach. International Journal for Numerical and Analytical Methods in Geomechanics, 39(10): 1027-1044. DOI: 10.1002/nag.2346.

Grenon, M., Bruneau, G., Kapinga Kalala, I., 2014. Quantifying the impact of small variations in fracture geometric characteristics on peak rock mass properties at a mining project using a coupled DFN-DEM approach. Computers and Geotechnics, 58: 47–55. DOI: 10.1016/j.compgeo.2014.01.010.

Esmaieli, K., Hadjigeorgiou, J., Grenon, M., 2013. Stability analysis of the 19A ore pass at Brunswick Mine using a two-stage numerical modeling approach. Rock Mechanics and Rock Engineering, 46(6): 1323-1338. DOI: 10.1007/s00603-013-0371-1.

Grenon, M., Hadjigeorgiou, J., 2012. Applications of Fracture System Models (FSM) in mining and civil rock engineering design. International Journal of Mining, Reclamation and Environment, 26(1): 55-73. DOI: 10.1080/17480930.2011.639190.

Grenon, M., Kabuya Mukendi, J., Hadjigeorgiou, J., Matte, P., Brunet, F., LeBlanc, D., 2012. Étude des critères de fiabilité des bancs miniers : le cas de la fosse Tiriganiaq au Nunavut. CIM Journal, 3(4): 223.

Grenon, M., Laflamme, A.-J., 2011. Inter-ramp and bench design of open-pit mines: the Portage pit case study. Canadian Geotechnical Journal, 48 (11): 1601-1615. DOI: 10.1139/T11-062.

Grenon, M., Laflamme, A.-J., 2011. Slope orientation assessment for open-pit mines, using GIS-based algorithms. Computers & Geosciences, 37(9): 1413-1424. DOI: 10.1016/j.cageo.2010.12.006.

Esmaieli, K., Hadjigeorgiou, J., Grenon, M., 2010. Estimating representative elemental volume (REV) for rock mass properties using synthetic rock mass modelling approach. International Journal of Rock Mechanics & Mining Sciences, 47(6): 915-926. DOI: 10.1016/j.ijrmms.2010.05.010.

Grenon, M., Hadjigeorgiou, J., 2010. Integrated structural stability analysis for preliminary open pit design. International Journal of Rock Mechanics & Mining Sciences, 47(3): 450-460. DOI: 10.1016/j.ijrmms.2009.11.001.

Grenon, M., Semlali, B., Bélanger, J., 2010. Intégration des données minéralogiques et géomécaniques pour la conception minière: le cas de la fosse J4 de la mine Troilus. CIM Journal, 1(1): 11-20.

Hadjigeorgiou, J., Esmaieli, K., Grenon, M., 2009. Stability analysis of vertical excavations in hard rock by integrating a fracture system into a PFC model. Tunnelling & Underground Space Technology, 24(3): 296-308. DOI: 10.1016/j.tust.2008.10.002.

 
© 2018 Tous droits réservés | Adapté d'un design original de BinaryTheme.com